Edition:
India
Pictures | Thu Jul 17, 2014 | 7:25am IST

The 3D printing revolution

Twinkind co-founder Timo Schaedel looks at a 3D-printed figure of himself at the Twinkind 3D printing studio in Berlin, December 13, 2013. Twinkind co-founder Timo Schaedel said, people often come to the 3D-scanning session well-groomed, with fresh hair-cuts and their best clothes, "just as they used to do in the past, when they had their portrait taken in a photo studio."  REUTERS/Thomas Peter

Twinkind co-founder Timo Schaedel looks at a 3D-printed figure of himself at the Twinkind 3D printing studio in Berlin, December 13, 2013. Twinkind co-founder Timo Schaedel said, people often come to the 3D-scanning session well-groomed, with fresh...more

Twinkind co-founder Timo Schaedel looks at a 3D-printed figure of himself at the Twinkind 3D printing studio in Berlin, December 13, 2013. Twinkind co-founder Timo Schaedel said, people often come to the 3D-scanning session well-groomed, with fresh hair-cuts and their best clothes, "just as they used to do in the past, when they had their portrait taken in a photo studio." REUTERS/Thomas Peter
Close
1 / 25
Customer Andreas Kroker has a 360-degree photographic scan taken at the Twinkind 3D printing studio in Berlin, December 13, 2013. A 3D-printed likeness is produced by taking a 360-degree photographic scan of a person, which is then rendered into a 3D digital model and retouched to meet the requirements for printing. The printing machine uses this digital model to produce a high-resolution solid figure. REUTERS/Thomas Peter

Customer Andreas Kroker has a 360-degree photographic scan taken at the Twinkind 3D printing studio in Berlin, December 13, 2013. A 3D-printed likeness is produced by taking a 360-degree photographic scan of a person, which is then rendered into a 3D...more

Customer Andreas Kroker has a 360-degree photographic scan taken at the Twinkind 3D printing studio in Berlin, December 13, 2013. A 3D-printed likeness is produced by taking a 360-degree photographic scan of a person, which is then rendered into a 3D digital model and retouched to meet the requirements for printing. The printing machine uses this digital model to produce a high-resolution solid figure. REUTERS/Thomas Peter
Close
2 / 25
Customer Andreas Kroker looks at a 3D-printed figure of himself at the Twinkind 3D printing studio in Berlin, December 13, 2013. REUTERS/Thomas Peter

Customer Andreas Kroker looks at a 3D-printed figure of himself at the Twinkind 3D printing studio in Berlin, December 13, 2013. REUTERS/Thomas Peter

Customer Andreas Kroker looks at a 3D-printed figure of himself at the Twinkind 3D printing studio in Berlin, December 13, 2013. REUTERS/Thomas Peter
Close
3 / 25
Multiple 3D-printed likenesses of a woman are seen at the Twinkind 3D printing studio in Berlin, December 13, 2013. REUTERS/Thomas Peter

Multiple 3D-printed likenesses of a woman are seen at the Twinkind 3D printing studio in Berlin, December 13, 2013. REUTERS/Thomas Peter

Multiple 3D-printed likenesses of a woman are seen at the Twinkind 3D printing studio in Berlin, December 13, 2013. REUTERS/Thomas Peter
Close
4 / 25
A picture shows a 3D-printed likeness of a boy at the Twinkind 3D printing studio in Berlin, December 13, 2013. REUTERS/Thomas Peter

A picture shows a 3D-printed likeness of a boy at the Twinkind 3D printing studio in Berlin, December 13, 2013. REUTERS/Thomas Peter

A picture shows a 3D-printed likeness of a boy at the Twinkind 3D printing studio in Berlin, December 13, 2013. REUTERS/Thomas Peter
Close
5 / 25
A figurine is printed by Aurora's 3D printer F1 during the 2014 Computex exhibition in Taipei, Taiwan June 3, 2014. REUTERS/Pichi Chuang

A figurine is printed by Aurora's 3D printer F1 during the 2014 Computex exhibition in Taipei, Taiwan June 3, 2014. REUTERS/Pichi Chuang

A figurine is printed by Aurora's 3D printer F1 during the 2014 Computex exhibition in Taipei, Taiwan June 3, 2014. REUTERS/Pichi Chuang
Close
6 / 25
Haitian boy Stevenson Joseph learns to use a 3D-printed prosthetic hand at the orphanage where he lives in Santo, near Port-au-Prince, April 28, 2014. Born with a disability, the 12-year-old became the first recipient in Haiti of a 3D-printer prosthesis, thanks to a British-born software engineer in California. REUTERS/Marie Arago

Haitian boy Stevenson Joseph learns to use a 3D-printed prosthetic hand at the orphanage where he lives in Santo, near Port-au-Prince, April 28, 2014. Born with a disability, the 12-year-old became the first recipient in Haiti of a 3D-printer...more

Haitian boy Stevenson Joseph learns to use a 3D-printed prosthetic hand at the orphanage where he lives in Santo, near Port-au-Prince, April 28, 2014. Born with a disability, the 12-year-old became the first recipient in Haiti of a 3D-printer prosthesis, thanks to a British-born software engineer in California. REUTERS/Marie Arago
Close
7 / 25
Haitian boy Stevenson Joseph practices using a 3D-printed prosthetic hand at the orphanage where he lives in Santo, near Port-au-Prince, April 28, 2014. REUTERS/Marie Arago

Haitian boy Stevenson Joseph practices using a 3D-printed prosthetic hand at the orphanage where he lives in Santo, near Port-au-Prince, April 28, 2014. REUTERS/Marie Arago

Haitian boy Stevenson Joseph practices using a 3D-printed prosthetic hand at the orphanage where he lives in Santo, near Port-au-Prince, April 28, 2014. REUTERS/Marie Arago
Close
8 / 25
A combination photo shows a 3D model of a complex anaplastology case, created in collaboration with the anaplastologist Jan De Cubber, at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013.    REUTERS/Yves Herman

A combination photo shows a 3D model of a complex anaplastology case, created in collaboration with the anaplastologist Jan De Cubber, at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves...more

A combination photo shows a 3D model of a complex anaplastology case, created in collaboration with the anaplastologist Jan De Cubber, at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves Herman
Close
9 / 25
A 3D model of a complex anaplastology case, created in collaboration with the anaplastologist Jan De Cubber, is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves Herman

A 3D model of a complex anaplastology case, created in collaboration with the anaplastologist Jan De Cubber, is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves Herman

A 3D model of a complex anaplastology case, created in collaboration with the anaplastologist Jan De Cubber, is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves Herman
Close
10 / 25
Twelve-year-old Leon McCarthy's prosthetic hand is seen as he talks to MakerBot CEO Bre Pettis (not pictured) at the new MakerBot store in Boston, Massachusetts November 21, 2013. McCarthy, whose prosthetic hand is made of parts printed from a MakerBot 3D printer, broke a piece of it while playing football, so he printed a new finger to repair it. REUTERS/Brian Snyder

Twelve-year-old Leon McCarthy's prosthetic hand is seen as he talks to MakerBot CEO Bre Pettis (not pictured) at the new MakerBot store in Boston, Massachusetts November 21, 2013. McCarthy, whose prosthetic hand is made of parts printed from a...more

Twelve-year-old Leon McCarthy's prosthetic hand is seen as he talks to MakerBot CEO Bre Pettis (not pictured) at the new MakerBot store in Boston, Massachusetts November 21, 2013. McCarthy, whose prosthetic hand is made of parts printed from a MakerBot 3D printer, broke a piece of it while playing football, so he printed a new finger to repair it. REUTERS/Brian Snyder
Close
11 / 25
Vanessa Palsenbarg, Corporate Communications Specialist at Belgian company Materialise, the biggest 3D printer in Europe, shows a 3D model called the Melonia Shoe, designed by Naim Josefi in collaboration with Souzan Youssouf, at the company's headquarters in Leuven January 24, 2013.     REUTERS/Yves Herman

Vanessa Palsenbarg, Corporate Communications Specialist at Belgian company Materialise, the biggest 3D printer in Europe, shows a 3D model called the Melonia Shoe, designed by Naim Josefi in collaboration with Souzan Youssouf, at the company's...more

Vanessa Palsenbarg, Corporate Communications Specialist at Belgian company Materialise, the biggest 3D printer in Europe, shows a 3D model called the Melonia Shoe, designed by Naim Josefi in collaboration with Souzan Youssouf, at the company's headquarters in Leuven January 24, 2013. REUTERS/Yves Herman
Close
12 / 25
Vanessa Palsenbarg, Corporate Communications Specialist at Belgian company Materialise, the biggest 3D printer in Europe, shows a 3D model called Burn Mask, a customized mask for facial scar management at the company's headquarters in Leuven January 24, 2013.    REUTERS/Yves Herman

Vanessa Palsenbarg, Corporate Communications Specialist at Belgian company Materialise, the biggest 3D printer in Europe, shows a 3D model called Burn Mask, a customized mask for facial scar management at the company's headquarters in Leuven January...more

Vanessa Palsenbarg, Corporate Communications Specialist at Belgian company Materialise, the biggest 3D printer in Europe, shows a 3D model called Burn Mask, a customized mask for facial scar management at the company's headquarters in Leuven January 24, 2013. REUTERS/Yves Herman
Close
13 / 25
A 3D object called the Quin.MGX is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013.    REUTERS/Yves Herman

A 3D object called the Quin.MGX is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves Herman

A 3D object called the Quin.MGX is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves Herman
Close
14 / 25
A 3D vase called The Hidd, designed by Dan Yeffetlamp is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013.    REUTERS/Yves Herman

A 3D vase called The Hidd, designed by Dan Yeffetlamp is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves Herman

A 3D vase called The Hidd, designed by Dan Yeffetlamp is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves Herman
Close
15 / 25
A 3D table lamp called the Lotus.MGX, designed by Janne Kyttanen, is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013.   REUTERS/Yves Herman

A 3D table lamp called the Lotus.MGX, designed by Janne Kyttanen, is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves Herman

A 3D table lamp called the Lotus.MGX, designed by Janne Kyttanen, is seen at the Belgian company Materialise, the biggest 3D printer in Europe, in Leuven January 24, 2013. REUTERS/Yves Herman
Close
16 / 25
A picture shows a twisted savonius rotor that was made by means of 3D printing in Berlin, January 7, 2013. The rotor was created by Gismo at the Raumfahrtagentur hacker space in Berlin and can be used in miniature wind turbines. REUTERS/Thomas Peter

A picture shows a twisted savonius rotor that was made by means of 3D printing in Berlin, January 7, 2013. The rotor was created by Gismo at the Raumfahrtagentur hacker space in Berlin and can be used in miniature wind turbines. REUTERS/Thomas Peter

A picture shows a twisted savonius rotor that was made by means of 3D printing in Berlin, January 7, 2013. The rotor was created by Gismo at the Raumfahrtagentur hacker space in Berlin and can be used in miniature wind turbines. REUTERS/Thomas Peter
Close
17 / 25
A picture shows figures that were created by means of 3D printing in Berlin, January 7, 2013. The figures are 3D printed representations of the original models that were recorded with 3D scanning technology by Gismo at the Raumfahrtagentur hacker space in Berlin.   REUTERS/Thomas Peter

A picture shows figures that were created by means of 3D printing in Berlin, January 7, 2013. The figures are 3D printed representations of the original models that were recorded with 3D scanning technology by Gismo at the Raumfahrtagentur hacker...more

A picture shows figures that were created by means of 3D printing in Berlin, January 7, 2013. The figures are 3D printed representations of the original models that were recorded with 3D scanning technology by Gismo at the Raumfahrtagentur hacker space in Berlin. REUTERS/Thomas Peter
Close
18 / 25
Wilfried Vancraen, chief executive of Belgian company Materialise, the biggest 3D printer in Europe poses for Reuters next to 3D designed objects at the company's headquarters in Leuven January 24, 2013.   REUTERS/Yves Herman

Wilfried Vancraen, chief executive of Belgian company Materialise, the biggest 3D printer in Europe poses for Reuters next to 3D designed objects at the company's headquarters in Leuven January 24, 2013. REUTERS/Yves Herman

Wilfried Vancraen, chief executive of Belgian company Materialise, the biggest 3D printer in Europe poses for Reuters next to 3D designed objects at the company's headquarters in Leuven January 24, 2013. REUTERS/Yves Herman
Close
19 / 25
A handout electron microscope photograph shows a human figure created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012. Researchers from the Vienna University of Technology have set a new world speed record for creating 3D nano objects. The University team create their grain of sand-size structures in just four minutes, a fraction of the time that other items have previously been printed. Previously making complex large 3D structures would take hours or even days but with the newly developed 3D laser printer the scientists can speed that up by a factor of 500 or in some cases 1,000 times. The process called "two-photon lithography" involves using a focused laser beam to harden liquid resin in order to create micro objects of solid polymer. The scientists said the technique could be developed to make small biomedical parts to be used by doctors.   REUTERS/Vienna University of Technology/Handout

A handout electron microscope photograph shows a human figure created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012. Researchers from the Vienna University of Technology have set a new world...more

A handout electron microscope photograph shows a human figure created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012. Researchers from the Vienna University of Technology have set a new world speed record for creating 3D nano objects. The University team create their grain of sand-size structures in just four minutes, a fraction of the time that other items have previously been printed. Previously making complex large 3D structures would take hours or even days but with the newly developed 3D laser printer the scientists can speed that up by a factor of 500 or in some cases 1,000 times. The process called "two-photon lithography" involves using a focused laser beam to harden liquid resin in order to create micro objects of solid polymer. The scientists said the technique could be developed to make small biomedical parts to be used by doctors. REUTERS/Vienna University of Technology/Handout
Close
20 / 25
A handout electron microscope photograph shows a nano-scale F1 racing car model created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012.    REUTERS/Vienna University of Technology/Handout

A handout electron microscope photograph shows a nano-scale F1 racing car model created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012. REUTERS/Vienna University of Technology/Handout

A handout electron microscope photograph shows a nano-scale F1 racing car model created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012. REUTERS/Vienna University of Technology/Handout
Close
21 / 25
Dissertation student Jan Torgersen of Vienna University of Technology operates a newly developed 3D laser printer, in Vienna March 29, 2012.   REUTERS/Herwig Prammer

Dissertation student Jan Torgersen of Vienna University of Technology operates a newly developed 3D laser printer, in Vienna March 29, 2012. REUTERS/Herwig Prammer

Dissertation student Jan Torgersen of Vienna University of Technology operates a newly developed 3D laser printer, in Vienna March 29, 2012. REUTERS/Herwig Prammer
Close
22 / 25
Dissertation student Jan Torgersen of Vienna University of Technology tries to make a laser beam visible on a newly developed 3D laser printer, in Vienna March 29, 2012.   REUTERS/Herwig Prammer

Dissertation student Jan Torgersen of Vienna University of Technology tries to make a laser beam visible on a newly developed 3D laser printer, in Vienna March 29, 2012. REUTERS/Herwig Prammer

Dissertation student Jan Torgersen of Vienna University of Technology tries to make a laser beam visible on a newly developed 3D laser printer, in Vienna March 29, 2012. REUTERS/Herwig Prammer
Close
23 / 25
A handout electron microscope photograph shows a nano-scale model of Vienna's St. Stephans cathedral created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012.    REUTERS/Vienna University of Technology/Handout

A handout electron microscope photograph shows a nano-scale model of Vienna's St. Stephans cathedral created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012. REUTERS/Vienna University of...more

A handout electron microscope photograph shows a nano-scale model of Vienna's St. Stephans cathedral created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012. REUTERS/Vienna University of Technology/Handout
Close
24 / 25
A handout electron microscope photograph shows a nano-scale model of London's Tower Bridge created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012.   REUTERS/Vienna University of Technology/Handout

A handout electron microscope photograph shows a nano-scale model of London's Tower Bridge created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012. REUTERS/Vienna University of...more

A handout electron microscope photograph shows a nano-scale model of London's Tower Bridge created by a newly developed 3D printing technique for nano structures, made available to Reuters March 29, 2012. REUTERS/Vienna University of Technology/Handout
Close
25 / 25

Next Slideshows

The month of Ramadan

Muslims mark the Islamic fasting month of Ramadan.

17 Jul 2014

Entrenched in east Ukraine

Government forces and pro-Russian rebels stand off in east Ukraine.

16 Jul 2014

Bastille Day

France marks its National Day and commemorates the beginning of the French Revolution.

15 Jul 2014

Running of the bulls

Runners guzzle wine and dodge horns on the cobbled streets of Pamplona.

14 Jul 2014

MORE IN PICTURES

Sania Mirza holds tennis clinic

Sania Mirza holds tennis clinic

Tennis player Sania Mirza and Bollywood star Neha Dhupia in action during the WTA Future Stars Masterclass in Hyderabad.

Floods in India

Floods in India

Floods triggered by heavy rains have killed more than 100 people in India in the past few weeks.

Editors Choice Pictures

Editors Choice Pictures

Our top photos from the last 24 hours.

Stocking up before Venezuela's strike

Stocking up before Venezuela's strike

Many Venezuelans were stocking up on food in anticipation of closed shops and trouble, after Venezuela's opposition called for a two-day strike.

From Russia with love

From Russia with love

Scenes of romance on the streets of Russia.

Fireflies light up the night in Mexico

Fireflies light up the night in Mexico

Tourists flock to sanctuaries near the town of Nanacamilpa in Mexico to watch fireflies as they gather to mate in the forest.

Going hungry in Yemen

Going hungry in Yemen

Millions are malnourished in Yemen where famine looms, the United Nations says, as a two-year war has led to a collapse in the economy and health system.

Santa's summer vacation

Santa's summer vacation

Santas get together for some summer festive fun at the annual World Santa Claus Congress in Denmark.

Deadly wildfires in southern Europe

Deadly wildfires in southern Europe

Firefighters battled wind-whipped infernos that have killed dozens in southern Europe.

Trending Collections

Pictures

Podcast